Putters

Available Options

Model 66

Product Specs

Dexterity:Right Handed Only
Material:Carbon Steel
Finish:Silver & Black Cesium
Weight:355g
Length:34in
Loft:
Lie:71°
Type:Heel/Toe
Toe Hang:3/4
Head Cover:Handmade Cover

Flanigan BiLT Putters in their designs tries its best to give these putters clean and classic looks as well as displaying homage to the great putters of the past while improving on innovation. This putter, of course, pays tribute to the 1966 Anser. An updated version of our popular FB1, the Steel Clover Series Model 66 is a classic heel-toe weighted blade with an offset L-neck. This mid-toe-weighted putter is ideally suited for players with a light to moderate arc in their putting stroke. We have shortened the

$325.00  This includes personal loft, lie, length  Order Now!
$325.00  This includes personal loft, lie, length  Order Now!

hosel this year, which provides a more ground-hugging look at address and helps prevent players from setting up closed (the most common setup fault with this hosel style). By shortening the hosel, increasing the onset and widening the sole, the Model 66 helps the player with the trailing dominate eye set square to the target. The result is a very classic looking heel-toe blade that combines the look players love with the performance benefits of having a perfect center of gravity and grooves that put a true roll on the ball.

Innovation L-Hosel on Model 66 (Break in Science)

When updating our popular FB1 we wanted to bring true innovation to the most popular putter style - the heel/toe balanced blade with L-neck (plumber's) hosel. After performing over 1000 fittings with high-speed cameras, ultrasound, and laser equipment, we have found that a high percentage of players aim left at address with this neck style. These putters are generally milled with a 2 degree hosel angle at set up. In layman's terms, the hosel will have a forward press built into the shaft at proper address. This 2 degree angle optically throws off the face angle and causes many players to line up about 2 degrees closed at address which generates pulled putts. This is especially true for trailing eye dominate players (the vast majority of players are trailing eye dominant). By shortening the hosel by over a 1/2 inch and increasing the onset by a fraction, we have taken that optical geometry out of the visual setup at address. We did this without sacrificing head weight and the full shaft offset that players love.

Model 87

Product Specs

Dexterity:Right Handed Only
Material:Carbon Steel
Finish:Silver & Black Cesium
Weight:360g
Length:34in
Loft:
Lie:70°
Type:Heel/Toe
Toe Hang:3/4
Head Cover:Handmade Cover

Flanigan BiLT Putters in their designs tries its best to give these putters clean and classic looks as well as displaying homage to the great putters of the past while improving on innovation. This putter is a tribute to the Taylor Made the 1987 TPA XVIII. New for 2014 is the Flanigan Bilt Model 87. This is an entirely new heel shafted mallet with a heavier toe weight for players with moderate to large arc in their putting stroke. The Model 87 features a squared off toe and top line to that sets up very square at address. The

$325.00  This includes personal loft, lie, length  Order Now!
$325.00  This includes personal loft, lie, length  Order Now!

heel-toe weighting expands the sweet spot. After thousands of fittings, we have designed this putter with the proper placement of the center of gravity both vertically and horizontally, which has created top spin while defusing skid and backspin after impact. The heel shaft features a very slight offset to accommodate players who like to use a forward press.

Innovation on Model 87

We have added precise draft to the sole of the Model 87 design from the leading edge to the trailing edge so the putter sets up square and tight at address without feeling you need to manipulate your hands forward like you see on most popular brands of this head design. Therefore, the Model 87 makes it easier to get into the proper launch angle at impact to promote top spin while making distance control a cinch.

Model 64

Product Specs

Dexterity:Right Handed Only
Material:Carbon Steel
Finish:Silver & Black Cesium
Weight:345g
Length:34in
Loft:
Lie:70°
Type:Heel/Toe
Toe Hang:Full
Head Cover:Handmade Cover

Flanigan BiLT Putters in their designs tries its best to give these putters clean and classic looks as well as displaying homage to the great putters of the past while improving on innovation. This putter is a 50 year tribute to the 1964 Wilson 8802. An updated of our popular FB2, our Model 64 may just be (and we say this with great reverence to its predecessors) the ultimate incarnation of the flanged blade putter. This heavily toeweighted putter is ideal for players with moderate to large arcs

$325.00  This includes personal loft, lie, length  Order Now!
$325.00  This includes personal loft, lie, length  Order Now!

in their putting strokes. We've increased the weight to 345 grams, increasing the feel and playability on modern, faster greens. The center of gravity is perfectly located on both the vertical and horizontal axis, producing a sweet spot below the sight dot, which combines with the increased weight to produce a higher moment of inertia (MOI) for this style putter. We kept the design and aesthetic clean and classic.

Innovation on Model 64

The Model 64 has been in prototype stage for two and a half years because we wanted to make sure we had true innovation for this classic blade. We shortened the hosel which makes the putter set up very sleek and square to the ground; once you address this putter it generates confidence and feel that you have full control over the entire stroke. In the past with similar blades are usually about 300g head weight. The Model 64 blade is balanced at 345g head weight which assures those 15 foot up hill putts will not be a problem for this blade. I guarantee if you like this head style you will not be disappointed with the Model 64.

FB1

The FB1 is a classic heel-toe blade design with a plumber’s neck that promotes a 3/4 toe hang. This putter is great for the player with a natural-arc putting stroke. The FB1 has been milled with soft forged carbon steel to give it an extremely soft feel. Ken paid special attention to the center of gravity in height and width to capture a super soft, yet solid feel at impact.

Product Specs

Dexterity:Right & Left Handed
Material:Soft Carbon Steel
Finish:Rifle Black
Weight:350g
Length:35in
Loft:
Lie:71°
Type:Heel/Toe
Toe Hang:3/4
Head Cover:Included

$325.00  This includes personal loft, lie, length  Order Now!
$325.00  This includes personal loft, lie, length  Order Now!

(coming soon)

The FB2 is a modern interpretation of the classic heal-shafted flange blade. The development of the FB2 was driven by the success of our original 'Designed By Flanigan' putter. By combining the heavier flange style of the 'Designed By Flanigan' with the soft forged carbon steel and milling techniques used in the FB1, Ken has developed what may be the finest flange blade ever made.

Product Specs

Dexterity:Right & Left Handed
Material:Soft Carbon Steel
Finish:Rifle Black
Weight:340g
Length:35in
Loft:
Lie:71°
Type:Blade
Toe Hang:Full
Head Cover:Included

$0.00  Currently not available!  Order Now!
$0.00  Currently not available!  Order Now!

FB3

The FB3 is a center-shafted mallet with a very clean, square setup. This putter is face-balanced for the player with a straight-back/straight-through putting stroke. Ken also milled the leading edge to allow players to apply a forward press if they so choose. The FB3 has been milled with the same soft forged carbon steel as used in the rest of the FB line.

Product Specs

Dexterity:Right & Left Handed
Material:Soft Carbon Steel
Finish:Rifle Black
Weight:375g
Length:35in
Loft:
Lie:68°
Type:Mallet
Toe Hang:None / Face Balance
Head Cover:Included

$325.00    Order Now!
$325.00    Order Now!

Fire Fighter 343

The 343 Firefighter Series was designed to commemorate the 10th anniversary of September 11, 2001 and honor those brave firefighters who gave their lives in the line of duty. This special edition putter will be limited to just 343 putters made of each style. While the number 343 was chosen to signify the number of New York City Firefighters who sacrificed their lives on 9/11, Ken built this putter to honor all fallen firefighters.

Product Specs

Dexterity:Right Handed Only
Material:Soft Carbon Steel
Finish:Smoked
Type:Heel/Toe, Mallet
 or Blade
Head Cover:Included
 Made of Nomex
 material

$275.00    Order Now!
$275.00  This includes personal loft, lie, length  Order Now!

Designed by Flanigan

This classic heel-shafted flange blade design is crafted from the finest stainless steel material. After experimenting with varying head weights Ken found that a 335 gram head, although heavier than most flange blade putters, provided optimal performance on any putting surface. Ken then adhered to tradition by keeping the face smooth and the center of gravity favoring the heel just a touch. With a full toe hang this putter is ideal for players who bring the club to the inside on their backstroke.

Product Specs

Dexterity:Right & Left Handed
Material:Stainless Steel
Finish:Brushed Stainless
Weight:335g
Length:34.5in
Loft:
Lie:71°
Type:Blade
Head Cover:Included

$195.00    Order Now!
$195.00    Order Now!
Copyright 2014 Flanigan Bilt Putters Developed By Mindstreams